JOURNAL TEMPLATE :
Archives
-
JURNAL TEKNIK INDUSTRI : NOVEMBER 2023
Vol. 4 No. 02 (2023)Jurnal Teknik Industri (JUTIN) is a journal published by Pelita Bangsa University under the supervision of the Institute of Research and Community Services (LPPM) Pelita Bangsa University and has an International Standard Serial Number (ISSN) of e-ISSN : 2809-1329 which was published at No. . SK 0005.28091329/K.4/SK.ISSN/2021.12 by the Indonesian Institute of Science (LIPI). Jurnal Teknik Industri (JUTIN) Volume 2 Number 2 is the 2nd issue in 2021.
This edition covers the areas of Quality Engineering, Productivity Improvement, Logistics & Distribution, Supply Chain Management, Performance Management & Systems Improvement, Modeling, Operations Management, Optimization, Green Manufacturing and Ergonomics. The entire article is the result of a study of the concept of application and innovation in the industry as well as the concept of its application.
Hopefully this paper can provide new perspectives and innovations in understanding various aspects of technology and phenomena that occur in society. Finally, the Editor would like to thank the researchers for their active participation in this journal.
-
JURNAL TEKNIK INDUSTRI: MEI 2023
Vol. 4 No. 01 (2023)Jurnal Teknik Industri (JUTIN) is a journal published by Pelita Bangsa University under the supervision of the Institute of Research and Community Services (LPPM) Pelita Bangsa University and has an International Standard Serial Number (ISSN) of e-ISSN : 2809-1329 which was published at No. . SK 0005.28091329/K.4/SK.ISSN/2021.12 by the Indonesian Institute of Science (LIPI). Jurnal Teknik Industri (JUTIN) Volume 2 Number 2 is the 2nd issue in 2021.
This edition covers the areas of Quality Engineering, Productivity Improvement, Logistics & Distribution, Supply Chain Management, Performance Management & Systems Improvement, Modeling, Operations Management, Optimization, Green Manufacturing and Ergonomics. The entire article is the result of a study of the concept of application and innovation in the industry as well as the concept of its application.
Hopefully this paper can provide new perspectives and innovations in understanding various aspects of technology and phenomena that occur in society. Finally, the Editor would like to thank the researchers for their active participation in this journal.
-
JURNAL TEKNIK INDUSTRI : NOVEMBER 2022
Vol. 3 No. 02 (2022)Jurnal Teknik Industri (JUTIN) is a journal published by Pelita Bangsa University under the supervision of the Institute of Research and Community Services (LPPM) Pelita Bangsa University and has an International Standard Serial Number (ISSN) of e-ISSN : 2809-1329 which was published at No. . SK 0005.28091329/K.4/SK.ISSN/2021.12 by the Indonesian Institute of Science (LIPI). Jurnal Teknik Industri (JUTIN) Volume 2 Number 2 is the 2nd issue in 2021.
This edition covers the areas of Quality Engineering, Productivity Improvement, Logistics & Distribution, Supply Chain Management, Performance Management & Systems Improvement, Modeling, Operations Management, Optimization, Green Manufacturing and Ergonomics. The entire article is the result of a study of the concept of application and innovation in the industry as well as the concept of its application.
Hopefully this paper can provide new perspectives and innovations in understanding various aspects of technology and phenomena that occur in society. Finally, the Editor would like to thank the researchers for their active participation in this journal.
-
JURNAL TEKNIK INDUSTRI : MEI 2022
Vol. 3 No. 1 (2022)JURNAL TEKNIK INDUSTRI is a journal published by Pelita Bangsa University under the supervision of the Research and Community Service Institute (DPPM) of Pelita Bangsa University and has an International Standard Serial Number (ISSN), namely e-ISSN: 2809-1329 and p-ISSN: 2809-4638 which has been issued at No. SK 0005.28091329/K.4/SK.ISSN/2021.12 by the Indonesian Institute of Sciences (LIPI). JURNAL TEKNIK INDUSTRI Volume 3 Number 1 is the 1st issue in 2022.
This edition covers the areas of Quality Engineering, Productivity Improvement, Logistics & Distribution, Supply Chain Management, Performance Management & Improvement System, Modeling, Operations Management, Optimization, Green Manufacturing, and Ergonomics. The whole article is the result of research on the concept of application and renewal in the industry as well as the concept of its application. Titles of articles included in this volume edition include; Analisis Pengendalian Kualitas pada Pengolahan Produk Lemari Tipe MC11 01 dengan Metode Statistical Process Control pada PT Alis Jaya Ciptatama; Optimisasi Non Linear Programming Multivariat pada Perencanaan Produksi Industri Manufaktur Baja Lapis Seng (BjLS); Penerapan Spare Parts Inventory Management System Berdasarkan Klasifikasi VESO dan RECOM untuk Mengurangi Searching Time pada Perusahaan Manufaktur Komponen Otomotif; Optimisasi Sistem Antrian di Era Pandemi untuk Meningkatkan Kinerja Pelayanan Stasiun Pengisian Bahan Bakar Umum (SPBU); Optimisasi Rute Pengiriman Produk Komponen Otomotif (Traveling Salesman Problem) Melalui Pendekatan Heuristik; Perawatan Carryroller Belt Conveyor C101 pada mesin Incinerator dengan Metode Fishbone Diagram di PT Fajar Surya Wisesa Tbk; Analisis Faktor Psikologi Yang Mempengaruhi Stres Kerja Pada PT. XYZ; Pengendalian Kualitas UMKM Bagus Bakery dengan Mengunakan Metode Seven Tools; Analisis hasil pengukuran Key Performance Indikator Ratio Produksi dengan Sigma level dan DPMO; Analisis Potensi Bahaya Dengan Menggunakan Metode Job Safety Analysis Di Bagian Mold Maintenance PT XYZ Plant Cikarang; and Pembuatan Sabun Ultra Transparan Berbasis Minyak Kelapa (Virgin Coconut Oil) Melalui Proses Pemanasan (Hot Process).
Hopefully this paper can provide new perspectives and innovations in understanding various aspects of technology and phenomena that occur in society. Finally, the Editor would like to thank the researchers for their active participation in this journal.
-
JURNAL TEKNIK INDUSTRI : NOVEMBER 2021
Vol. 2 No. 2 (2021)Jurnal Teknik Industri (JUTIN) is a journal published by Pelita Bangsa University under the supervision of the Institute of Research and Community Services (LPPM) Pelita Bangsa University and has an International Standard Serial Number (ISSN) of e-ISSN : 2809-1329 which was published at No. . SK 0005.28091329/K.4/SK.ISSN/2021.12 by the Indonesian Institute of Science (LIPI). Jurnal Teknik Industri (JUTIN) Volume 2 Number 2 is the 2nd issue in 2021.
This edition covers the areas of Quality Engineering, Productivity Improvement, Logistics & Distribution, Supply Chain Management, Performance Management & Systems Improvement, Modeling, Operations Management, Optimization, Green Manufacturing and Ergonomics. The entire article is the result of a study of the concept of application and innovation in the industry as well as the concept of its application. The titles of the articles included in this edition of this volume include; Analisa Time Study SAW Assy Produksi Bucket PT. XYZ; Perancangan Soto Dandori Spare Parts System dan Hydraulic Tools untuk Reduce MTTR dan Efesiensi Man Power; Analisis Pengaruh Proses Pengeringan Nata De Coco Terhadap Pertumbuhan Jamur Pada Bioselulosa Nata De Coco; Analisis Sentimen Pada Media Sosial Twitter Mengenai Tanggapan Vaksinasi COVID-19 Menggunakan Metode Naive Bayes; Penerapan Metode Reliability Centered Maintenance (RCM) dan Fault Tree Analyze (FTA) Pada Mesin Cetak Lembar [Studi Kasus Percetakan XYZ Di Cikarang]; Aplikasi Konsep Kaizen Dengan Pendekatan Perbaikan Proses Untuk Menurunkan Produk Cacat pada Proses Perakitan Baterai; Kriteria Pengambilan Keputusan Majemuk Pada Pemilihan Supplier Bahan Baku Kulit Sepatu; Analisis Kepuasan Karyawan Menggunakan Metode Internal Service Quality (INTQUAL) Studi Kasus : Industri Pewarnaan Biji Plastik; and Tinjauan Literatur Sistematis Implementasi Total Quality Management pada Industri Manufaktur – Tren Terkini dan Arahan Masa Depan.
Hopefully this paper can provide new perspectives and innovations in understanding various aspects of technology and phenomena that occur in society. Finally, the Editor would like to thank the researchers for their active participation in this journal.
